Superstrut/Unistrut Galvanized Locking nut, SS 1/4" SS screw, washer & nut set.
Specially designed for solar panel mounting. This kit is perfect for mounting solar accessories to the unistrut channel.
Can be used as a general unistrut/superstrut channel mounting.
NOT RECOMMENDED FOR MOUNTING THE SOLAR PANELS THEMSELVES. Please see our stronger 1/4" Aluminum Locking set.
PRODUCT OVERVIEW
- For use in mounting solar accessories to Unistrut or Superstrut.
- Can also be used most anywhere a light duty unistrut clamp is required.
4 Sets
|
This item consists of |
| 4) Unistrut/Superstruct compatable lock washers, made of 10 gauge hot dipped galvanized steel. |
| 4) Stainless steel 1/4 x7/8 hex head tap bolts (threaded the entire length. |
| 4) Stainless steel 1/4" flat washers. |
| 4) Stainless steel 1/4" hex nuts. |
- Precision cut on our Waterjet cutter in Coleman Texas, U.S.A
Please note. The micro-inverter & Unistrut channel shown in the photo are not included, only the fasteners.
