My Account | Login | Checkout

You are not logged in

Enter the search term for the product you are looking for below:

More Options
Display my previous orders

To repeat a previous order in part or full, click the link above. To purchase or view any of the items you have purchased before, simply select it from the list below.


Coleman Air MP-40 MPPT Controller


Click on image for full size
Coleman Air MP-40 MPPT Charge Controller
MP-40 MPPT Charge Controller with Remote Menu
Buck & Boost Capable.
Designed for wind,hydro and solar.
Over-current protected.

MP-40

Internal Mini-clipper
100 Watt + $75.00 
70 Watt (Legacy Model) + $25.00 
None 

Dual MPPT & PWM
None 
PWM + $50.00 

Available in increments of 1
Quantity
Total Percent Off Per Unit
1
$633.94 0% $633.9400
2
$1,204.49 5% $602.2430
5
$2,931.97 7.5% $586.3945
$5,388.49 15% $538.8490
$10,460.01 17.5% $523.0005
$12,678.80 20% $507.1520
$23,772.75 25% $475.4550
$45,960.65 27.5% $459.6065


Coleman Air

A truly unique EMP hardened MPPT charge controller featuring both buck (voltage downshifting) and boost (up shifting) of input signals to squeeze out the highest potential that your alternate energy source has to offer.  Works with solar, wind and hydro.

Description

  • High efficiency buck/boost MPPT charge controller.
  • Capable of boosting small input voltages up to 60 volts.
  • Works seamlessly with Solar, Wind and Hydro inputs up to 100 volts.
  • Fully digital remote user interface can be located in another room.
  • Perfect for RV’s, Motor homes, trucks, cabins and small to medium solar or wind systems.
  • Continuously streams CSV data via USB port, which can be viewed or stored.
  • EMP Hardened. NEMA 3R, outdoor enclosure.
  • No jumpers or potentiometers need to be set..
  • Included Remote Menu Module, with 2 x 16 back-lit LCD display.
  • Both manual and automatic equalize modes are available..
  • Automatic nominal battery voltage detection, no setup required.
  • Nearly all charge parameters can be managed through the user interface.
  • Supports voltage and amperage calibration to fine tune performance.
  • Optional high battery SSR module can be used to engage external diversion loads.
  • Automatic LCD back light dimming to save energy.
  • One year standard warranty against manufacturer defects.
  • 12, 24 or 48-volt battery systems.
  • 2400 watts continuous power with 48 volt systems, 1200 watts with 24 volt systems and 600 watts with 12 volt systems.
  • Lockable cover, with standard conduit openings on bottom of box.
  • Modular PCB Layout.

100W Mini-clipper is recommended for Wind/Hydro installations.  It is not needed for Solar Installations.

The PWM module is recommended for Solar Installations and is optional for Wind/Hydro.   The PWM module can greatly increase the efficiency of the unit when the input charge source matches the battery bank and does not require boosting or bucking. 

MP-20-QuickStartGuide

Download the Full Manual



The enclosure is heavy gauge, solid steel, ready to mount. -- No plastic, no junk, simple and rugged.




GetAwayPower MP-40




GetAway Power MPPT Controller




 





MP-40-Inside


 

MP-40-Inside



MP-40 Inside with100W  Mini-Clipper
MP-40 Inside with 100W Mini-clipper.






The remote menu module can be installed up to 20 foot away from the main controller. A 10' cord is included.

You may use a standard CAT-5 Ethernet cable for longer distances. A shielded cable is preferred for longer distances.


*****

Processor Hookup

Menu and USB Serial Output (Data logging Stream).



Inside the MP-40


****

 

 

Shipping And Returns
Our shipping charges are basically what it cost us to ship. International shipping rates via the USPS for this weight are much higher than you might expect. Please click HERE to view just how much these charges are, and you will see that our rates are just what it cost. We would charge less, if it cost us less.

Due to major delays in customs, we no longer ship to Italy.

To our International customers. We cannot misrepresent the price of the products being shipped to you. You are responsible for any and all tariffs, duties or import fees imposed by your country or customs.

Returned items must be in their original condition and fully resalable. Returns may incur a 20% restocking fee. Damages that occur during return transit will be liable to the buyer. Buyer is responsible for all tariffs, customs fees, VATs.

 

 

 

 

 

If you have any questions, please do not hesitate to ask, we are happy to help.


 

Thanks For Looking!

Coleman Air -- Empowering Innovation

Wind and Solar Controllers, Electronics, Hardware & Accessories perfect for the DIY'er.

 

Empowering Innovation

 




Featured videos

Coleman Air Products

Copyright 2010-2017 Coleman Air, Inc. All rights reserved.

Have Questions? -- Please call us at 1-800-577-4169


We verify orders.

In addition to standard credit card verification procedures which insure the credit card is not stolen, we also verify the computer IP address, phone numbers, etc., to ensure the person placing the order is not doing so for fraudulent purposes. We work with all applicable agencies to prevent and/or report fraudulent or suspicious activity.

Official PayPal Seal